Overview:
AX520 has 2 line and one phone jack. The line jacks can connect to PSTN line and VOIP line. Whenever there is a ring from either of them, the phone can ring and answer. When the user wants to make a phone call, it goes through LINE1 jack automatically. If user dials #, 0 before the telephone number, it will dial out from LINE2 jack. It is ideal for FXS VOIP units. Sometimes the users don't have enough line port on PBX or KTS. It can expand the number of CO line ports.
Features:
Two Lines Answering Automatically
You can connect two Lines at the same time and judge the telephone to be received according to rings.Auto Engagement
When a user is using either of two Lines, the other Line will be engaged automatically to make an incoming call transfer to next Line.Dialing Out From Fixed Line
LINE1 is used to dial telephone numbers fixedly.Forced Dialing Out From LINE2
LINE2 can be connected forcedly by pressing # ,0 before the telephone number you wanted.Multi-functional Indicator
In the standby mode, the double-color indicator lights in red every two seconds. When ringing, LINE1 flashes in red and LINE2 flashes in green. When talking, LINE1 lights in red and LINE2 lights in green.Flash Time Detection
During using the telephone set, if a user switches HOOK button with 800 ms, the auto switch will think the user transfer a call and not disconnect LINE. If the time of switching HOOK is more than 800ms, the auto switch will disconnect LINE and switch to LINE1.
Diagram:
1.Connect the AC/DC adaptor (DC18V/200mA)
2.Connect a telephone line (or an analog PBX inter line) to LINE 1 of AX520, and another line to LINE 2
3.Connect the telephone set (or the CO line interface of a PBX) to PHONE jack of.
Locatie: Flevoland - Dronten
Toegevoegd op 18 dagen geleden en vervalt op 28 May
Advertentie id: 1611824
[ ]
82 bezoeken
