Kabel gemaakt door Wenzelsystems (zie: wenzel-systems . de). Zonder handleiding, zonder software. Raad pleeg de Hicom handleiding voor gebruik.
The cable with plug-integrated electronic has been developed as an inexpensive alternative for the original siemens-cable (which is not available anymore). It can be used to maintain and check the online-costs for PABX-systems of the Siemens Hicom 100E series. This includes the Hicom 108, 112 and 118 series as well. The systems Telekom Octopus E10, E20 and E30 are identically constructed too.
The cable can also be used for the Siemens Hicom 150 E OfficeOne, OfficeStart-systems and LAN-boards HXGM and HXGS. But a warranty can not be given for this units. The Hicom 116 by Siemens is not configurable by a personal computer, but our cable could be used to back-up the customer-specific settings of the system to a hard drive of a PC and check the online-costs.
The electronic is integrated in the SUB-D-plug, not outside in extra box.
To use the cable with the "Assistant L"-software you have to connect the cable with the serial interface of the PC at one end and with the 6-pin Mini-DIN-socket of the Hicom device. If you want to use a gender-changer be aware that a full connected type is used. Please select the same Baud rate at both interfaces, a rate of 2400 or 9600 can be used. Be aware that some restrictions could apply here if you extend the lenght of the cable. If you plan to use the cable for registration of costs with a printer, a applicable adapter between SUB-D-plug and serial interface has to be used. These system has to be configured accordingly for that as well.
Ophalen of via Postnl (brievenbuspakje 4)
Locatie: Noord-Holland - Amsterdam
Toegevoegd op 13 dagen geleden en vervalt op 14 June
Advertentie id: 1391260
[ ]
82 bezoeken
